PAIL SECTION

PRODUCTS FILLER

For liquid, semi-viscous, and viscous products, the depositors of the DV series are recommended, the required model depending on the requested productivity: please contact us to define together the one that best fits your needs.
The DM1000 is recommended for foamy products, such as some fruit juices and/or for dangerous liquid products like acids.
The DM1800 is used for powder or granular products.
The DT1000 is an economical solution to fill a big quantity of liquids when the accuracy is not required, like, for instance, with brine or water.
A volumetric transfer piston pump, like our PV2000 will allow you to feed continuously the hopper of the depositor with liquid, semi-viscous, and viscous products.

With this pails filling line you can achieve impressive speed with 5-USGal; for instance, coupled with our DV3000 you can reach up to 7,5 pails /min, and with a DV3000-Quadruple you can go as fast as 30 pails /min.

With the FS1800, you can close any kind of pails and industrial pails, except the UN-pails and similar, i.e. the ones that are made for dangerous liquids such as acids.
With the FS1800-UN, on the other hand, you can close the UN-pails and similar, as well.

An accumulation turning table of 5 feet diameter may be useful as a buffer, at the end of your filling line.

High speed
Where quantity is small
For dry products either granular or in powder such as spices or peppercorns