Cup, tub and tray filling line - machineContainers packaging machine

Model FDS2500

The FDS2500 is a containers packaging machine. It is designed for filling / packing / packaging your food products containers.  It dispenses automatically retail type containers like plastic cup, tub, tray or bucket, bring them to the filling position, activates the optional cup sealing machine, (see our PL500), bring the containers under the lid or over-cap depositor unit, and then under the closing unit.

This food packing / packaging machine can fill either liquid, dry, viscous  or sticky products. Built for retail type open mouth containers, its versatility allows you to fill on the same machine many different shapes ( round, square, oval) and size containers either in plastic, paperboard, aluminum, etc.

Base machine, allow you to fill and close regular or tamper evident containers.  Adding a plastic film automatic heat sealing machine (PL500) allow you, still on the same line to use sealable containers, with or without an over-cap.

Set up time take about 20 minutes.  When required, pre-adjusted tooling for a new container shape or size  can be bought for a nominal cost allowing you to introduce at will  new SKU to stay on top of the market.



Up to date robot-like machine with modular functions usable on need
PLC controlled independent modules
Reliable pick and place unit for lids & containers distribution
True one by one lids & containers escapement system
Trustworthy air removing closing head
All metal parts in stainless steel => long lasting, fully washable
Control GMC – HMI: a user-friendly touch-screen machine/operator interface, with status, set up, a maintenance screen, and production statistics
Control GMC – Safety operation & easy maintenance: this machine automatically stops the depositor if no container has arrived or stops itself if the lid denester head is jammed. Easily accessible mechanical parts , simple open design. On-screen error detection and diagnosis. In-house programming & support. NEMA 4X wash down fibreglass control box, with temperature control when use in cold environment
Control GMC – Flexibility: simple & quick container size changeover, with a unique pocket-like adjustable conveyor, a preset lid & container interchangeable denester heads, height adjustable modules and up to 8 set of timers to easily adapt both conveyor and modules speed to the new container and or product.
Containers packaging machine FDS2500


1 or more denester(s) head(s) for different containers format
1 or more denester(s) head(s) for different lids format
1 or more special denester(s) head(s) for buckets with handle
1 or more depositor(s), or mixer(s) & depositor(s) (see the DV, DM, and DVM series)
1 or more transfer pump(s) to feed the depositor(s) (see the PV series)
1 automatic plastic-film sealer model PL500
1 “hat”: i.e. a vertical pneumatically actuated PRODUCT CONTAINMENT SYSTEM, at the filling position : to guide the dry product in pieces down to the container and avoid at the same time the product to bounce out of the container
1 “catcher”: i.e. an option to the above “hat”, acting as a product’s buffer: it will collect the right quantity of the dry product in pieces, before a new empty container arrives at the filling position, thus cancelling any delay in the product’s chute
1 automatic feta (or similar) cheese block cutter or dicer
1 in line check weigher with container ejector (recommended for feta cheese blocks or similar products) Can also be use when possible, to readjust the depositor.
1 additional protection against BRINE, CHLORIDES and ACIDS (recommended for corrosive ambient)
1 container lifting device at the filling position for BOTTOM FILL; for example, to compact dry powder while filling, or for ice cream application to avoid air entrapment
1 accumulation turning table at the exit of the filling line (see the T50)


Range: 4 oz to 15 lbs
Maximum speed per minute, for dry products or for viscous products, up to: 70 for 1 lbs tubs, and 50 for 5 lbs buckets
Electricity: 208-240 VAC, 5 amps, 60 Hz
Compressed air: up to 2 cfm @ 80 psi
Gearmotor: AC motor with dedicated gearbox and inverter drive
Lids pile up height: 40″
Containers pile up height: 60″
Footprint, approx (L x W) : 135″ x 40″, with no option
/* ]]> */