• Up to date robot-like machine with modular functions usable on need
• PLC controlled independent modules
• Reliable pick and place unit for lids & containers distribution
• True one by one lids & containers escapement system
• Trustworthy air removing closing head
• All metal parts in stainless steel => long lasting, fully washable
• Control GMC – HMI: a user-friendly touch-screen machine/operator interface, with status, set up, a maintenance screen, and production statistics
• Control GMC – Safety operation & easy maintenance: this machine automatically stops the filler if no container has arrived or stops itself if the lid denester head is jammed. Easily accessible mechanical parts , simple open design. On-screen error detection and diagnosis. In-house programming & support. NEMA 4X wash down fibreglass control box, with temperature control when use in cold environment
• Control GMC – Flexibility: simple & quick container size changeover, with a unique pocket-like adjustable conveyor, a preset lid & container interchangeable denester heads, height adjustable modules and up to 8 set of timers to easily adapt both conveyor and modules speed to the new container and or product.

• 1 or more denester(s) head(s) for different containers format
• 1 or more denester(s) head(s) for different lids format
• 1 or more special denester(s) head(s) for buckets with handle
• 1 or more filler(s), or mixer(s) & filler(s) (see the DV, DM, and DVM series)
• 1 or more transfer pump(s) to feed the filler(s) (see the PV series)
• 1 automatic plastic-film sealer model PL500
• 1 « hat »: i.e. a vertical pneumatically actuated PRODUCT CONTAINMENT SYSTEM, at the filling position : to guide the dry product in pieces down to the container and avoid at the same time the product to bounce out of the container
• 1 « catcher »: i.e. an option to the above « hat », acting as a product’s buffer: it will collect the right quantity of the dry product in pieces, before a new empty container arrives at the filling position, thus cancelling any delay in the product’s chute
• 1 automatic feta (or similar) cheese block cutter or dicer
• 1 in line check weigher with container ejector (recommended for feta cheese blocks or similar products) Can also be use when possible, to readjust the filler.
• 1 additional protection against BRINE, CHLORIDES and ACIDS (recommended for corrosive ambient)
• 1 container lifting device at the filling position for BOTTOM FILL; for example, to compact dry powder while filling, or for ice cream application to avoid air entrapment
• 1 accumulation turning table at the exit of the filling line (see the T50)

• Range: Maximum container specification

Diameter: maximum 13 inch

Height: maximum 18 inch

Minimum size: Most 1 lbs containers

• Maximum speed per minute, for dry products or for viscous products, up to: 50 for 5 lbs buckets
• Electricity: 208-240 VAC, 5 amps, 60 Hz
• Compressed air: up to 2 cfm @ 80 psi
• Gearmotor: AC motor with dedicated gearbox and inverter drive
• Lids pile up height: 40″
• Containers pile up height: 60″
• Footprint, approx (L x W) : 135″ x 40″, with no option