Liquid Products with or without (big) chunks

Specific Devices

• The "tunnel" : for liquid products, hot or cold, in order to prevent any splashing during the high speed filling phase, we developed an anti-splashing plate which integrates the dispensing valve : this allows us to reach a high speed up to 40 1 lb TUBS/MINUTE on a SINGLE LANE machine.

• Big dispensing valve diameter : from 1" to 3", to avoid smashing or cutting the chunks (if any)

Well adapted fully integrated equipment

• Trays, cups, tubs, and buckets filling lines : single or multi-lane

• With one or more products fillers :
  • For either hot or cold products
  • Or, SPECIALLY FOR SOUPS , integrating a product MIXER and an anti-splashing tunnel : the DVM2000

Additional Modules

For fully integrated filling lines :

• Automatic trays, tubs, cups or buckets plastic film sealer / lidder: the PL500
• For the multi-lane filling lines, a lane concentrator may be required: the LC50 
• Transfer pump to feed our filler: the PV1000

For small production : stand alone components can be proposed (please visit our Machine Guide), such as, for example :

• a container denester DS1500,
• a container closer FS1500
• a lid denester and closer FDS1400,
• a filling position plus a lid denester and closer: the FDS1500,
• or an accumulation table T50